Configuring OpenVPN for use with Bitium RADIUS

In Bitium:

  1. If you’ve not already set up a RADIUS client for your OpenVPN server follow the instructions to do so: Configuring a RADIUS client in Bitium

In OpenVPN:

  1. Log into Your OpenVPN admin interface.

  2. Navigate to the “General” section under “Authentication”

    General

  3. Select “RADIUS” as the User Authentication method, click “Save Settings”, then navigate to the “RADIUS” section under “Authentication”

    Set RADIUS

  4. Select “PAP” as the RADIUS authentication method, fill in the local IP address where your RADIUS proxy is running, enter the “Shared Secret” you configured in Bitium, then click “Save Settings”.

    Configure your RADIUS server